Daikin RXTA30B2V1B Service Manual page 155

RXTM-R+RXTP-R+ARXTP-R+RXTA-B+FTXTA30B2V1B(W)
(B)+FTXTM30+40R2V1B+FTXTP25+35M5V1B+ATXTP25+35M5V1B
R32 Optimized Heating 4 Split
ESIE21-12A – 2022.02
a Hook
Prerequisite: If working space is limited.
7 Insert a flat screwdriver next to the hooks.
8 Pull the front grille up using the flat screwdriver and push towards the
mounting plate.
a Hook
b Flat screwdriver
FTXTM-R units
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,...)
when installing, maintaining or servicing the system.
1 Remove the front panel to remove the air filter.
2 For class 40 remove the flap (horizontal blade). Push the blade on its left side
to the centre and unhook it. Push blade on its right side to centre to unhook it
from shaft. Disconnect the 2 centre connection points.
1 3
3 Remove 2 screws (class 30) or 3 screws (class 40) from the front grille.
4 Push down the 3 upper hooks marked with a symbol with 3 circles.
a b
a Upper hook
b Symbol with 3 circles
a
a
b
4 2
3×
a
4 Components
|
Service manual
155