Toshiba VF-NC3C Instruction Manual page 76

FOR REFERENCES ONLY
6.1.3 Output of set frequency speed reach signal
 : Speed reach setting frequency
 : Speed reach detection band
 Function
When the output frequency becomes equal to the frequency set by , an ON or OFF
signal is generated.
[Parameter setting]
Parameter setting of frequency and detection band
Title

Speed reach setting frequency

Speed reach detection band
Parameter setting of output terminal selection
Title
Output terminal

selection 1A (OUT)
Setting value 9 is reverse signal.
Note: Set  to output to FLA-FLC-FLB terminals.
VFNC3C ENGLISH MANUAL
Output frequency [Hz]
Designated frequency  
Designated frequency
Designated frequency  
0
Set frequency speed reach signal
Between OUT-NO terminals
Set frequency speed reach signal:
Inverted
Function
Function Adjustment range
0-255
(Refer to section 11.7)
F-3
NOT SUBJECTED FOR RESALE
Time [s]
ON
OFF
OFF
ON
OFF
Adjustment range
0.0   (Hz)
0.0   (Hz)
Setting
8: RCHF (Set frequency attainment
signal)
6
Default setting
0.0
2.5