Toshiba VF-NC3C Instruction Manual page 26

FOR REFERENCES ONLY
3.4 Meter setting and adjustment
 : Meter selection
 : Meter adjustment gain
 Function
Output of 0 - 1mAdc, 0 (4) - 20mAdc, 0 - 10vdc can be selected for the output signal from the FM
terminal, depending no the  setting. Adjust the scale at .
Use an ammeter with a full-scale 0 - 1mAdc meter.
The  (analog output bias) needs to be adjusted if output is 4 - 20mAdc.
[Parameter setting]
Title Function
Meter

selection
Meter

adjustment
gain
VFNC3C ENGLISH MANUAL
Adjustment range
0: Output frequency
1: Output current
2: Frequency reference
3: Input voltage (DC detection)
4: Output voltage (command value)
5 to 11: -
12: Frequency setting value (after
campensation)
13: VI input value
14: -
15: Fixed output 1 (output current 100%
equivalent)
16: Fixed output 2 (output current 50%
equivalent)
17: Fixed output 3 (other than the
output current)
18: RS485 communication data
19:For adjustments ( set value is
displayed.)
20 to 22: -
-
C-13
NOT SUBJECTED FOR RESALE
Supposition output at
Default setting
fsl=17
Maximum frequency ()
-
Maximum frequency (fh)
1.5x rated voltage
1.5x rated voltage
-
Maximum frequency (fh)
Maximum input value
-
-
-
-
Maximum value (100.0%)
-
-
-
2
3
0
-