Configuring Your Host Multivoip - Multitech MultiVOIP 400 MVP400 Quick Start Manual

Configuring Your Host MultiVOIP

The following software loading procedure does not provide
every screen or option in the loading process. The
assumption is that a technical person with a thorough
knowledge of Windows and the software loading process is
doing the installation. Additional information on the MultiVOIP
software is provided in the User Guide supplied with your
MultiVOIP.
If you are installing a MultiVOIP behind a firewall, you need to
add the following UDP ports to your firewall.
Q.931 Signaling, Ch1[900]
Q.931 Signaling, Ch3[904]
Status [5000]
Ch1 RTP [5004]
Ch2 RTP[5006]
Ch3 RTP[5008]
Ch4 RTP[5010]
Refer to your firewall user documentation to enter and open
these ports.
1. Verify that your MultiVOIP400 has been properly cabled
and that the power is turned on.
2. Insert the MultiVOIP400 CD into your CD-ROM drive. The
CD should start automatically. It may take 10 to 20
seconds for the MultiTech CD installation window to
display.
Software Installation
Q.931 Signaling, Ch2 [902]
Q.931 Signaling, Ch4 [906]
Ch1 RTCP [5005]
Ch2 RTCP [5007]
Ch3 RTCP [5009]
Ch4 RTCP [5011]
13