Figure 7-1 Removing The Rear Panel Cover Screws - Sun Microsystems SPARCstation 4 Service Manual

1. Press the Standby side of the system power switch.
2. Loosen the captive Phillips-head screw in the upper-right corner of the rear panel
(see
3. Unscrew the Phillips-head screw that secures the lock block to the cover. Remove
the lock block and put it aside (see
FIGURE 7-1
4. Lift the cover free of the chassis.
See
FIGURE 7-2
7-2 SPARCstation 4/Xterminal 1 Service Manual • January 1995
).
FIGURE 7-1
Removing the Rear Panel Cover Screws
.
).
FIGURE 7-1