Mounting The Hardware - ICP DAS USA MDC-714i User Manual

2.6. Mounting the Hardware

 Wall/Panel mounting
Step 1: Install the four mounting screws into the 4 keyhole mounting holes.
Step 2: Fasten the screws securely.
 DIN Rail mounting
Step 1: Align the screw holes of the DIN-rail clip with the holes on the back side of the module,
and then fasten the screws securely.
Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E-mail: service@icpdas.com
1
- 16 -