1
----------------------------------------------------------------------------------
Mounting the Hardware
The ET-87Pn installation must provide proper ventilation, spacing, and grounding to
ensure the equipment will operate as specified. A minimum clearance of 50mm between
the ET-87Pn and the top and bottom side of the enclosure panels must be provided.
2
-----------------------------------------------------------------------------------
Connecting to PC, Network and Power
The ET-87Pn is equipped with RJ-45 Ethernet ports for connection to an Ethernet
hub/switch and PC. You can also link directly the ET-87Pn to PC with an Ethernet cable.
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
2