ICP DAS USA MDC-714i User Manual page 34

 Connection Configuration
The Connection Configuration section provides the configuration information including Modbus ID,
Modbus TCP port on the MDC-700, and Baud Rate. Data Format, Response Timeout, Delay Between
Polls, Operation Mode settings for each COM port.
Modbus ID Modbus TCP Port
COM Port Settings
 Ethernet Configuration
In this section you can obtain or set the Ethernet Configuration. To change the Ethernet parameters,
you just need to input the valid IP, Subnet mask and Gateway addresses and then click APPLY.
Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E-mail: service@icpdas.com
- 34 -