ICP DAS USA MDC-714i User Manual page 19

STEP 2: Set the IP configuration on your computer.
If the MDC module is new with default IP address of 192.168.255.1, your pc should pick up an
IP address in the range of 192.168.255.2 to 192.168.255.253 that is not in use.
NOTE
Details on how to change the IP address on your computer depend upon the type
architecture and operating system you are using. Use the Help and Support functionality on
your computer and search for "IP Addressing".
STEP 3: Enter the IP address of the module into the web browser.
(For example, http://192.168.255.1)
STEP 4: Create your account (for the first time login)
Upon initial login through the web interface, you will be prompted to create your username
and password as an administrator. Both username and password must be at least four
characters; they can be composed only of alphanumeric (A-Z, a-z, 0-9, case-sensitive)
characters and dot (.), dash (-), underline (_) and at (@) symbols.
Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E-mail: service@icpdas.com
1. Enter your username (> 4 characters)
2. Enter your password
3. Enter your password again
4. Click CREATE ACCOUNT
- 19 -