ICP DAS USA MDC-714i User Manual page 33

 Modbus Connection
In the Modbus Conncetion section, it provides the scan time information for each COM port
(available in firmware 1.08 and later). The Master device can refer to the scan time to extend or
shorten the time interval for each requesting data command.
Current Scan Time MAX. Scan Time Min. Scan Time Reset Record
Expand the polling definitions by clicking [+COMn] item, information including the polling definition
number, SlaveModbusID, Starting Address of Register and Count of Register on both slave client and
MDC-700, and the connection status are provided.
Connection Status: Good
Connection Failed
NOTE The contents of the section may be different depending on the settings
in the config.csv file.
Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E-mail: service@icpdas.com
- 33 -