ICP DAS USA MDC-700 Series Quick Start
Hide thumbs
Also See for MDC-700 Series:
- User manual (42 pages) ,
- Quick start (4 pages) ,
- User manual (34 pages)
Advertisement
Quick Links
Technical Support
M
DC-700 User Manual
h
ttp://ftp.icpdas.com/pub/cd/8000cd/napdos/modbus/mdc700/document/
What's in the Box?
The package includes the following items:
MDC-700 Module
Technical support: service@icpdas.com
MDC-700 Series
RS-232 Cable
(CA-0910)
DIN-Rail Mounting Kit
(Clip x 1, Screw x 4)
Quick Start
V1.1, March 2018
Screw Driver
(1C016) 2.4 mm
P1
Advertisement
Related Manuals for ICP DAS USA MDC-700 Series
Summary of Contents for ICP DAS USA MDC-700 Series
- Page 1 MDC-700 Series Quick Start V1.1, March 2018 Technical Support DC-700 User Manual ttp://ftp.icpdas.com/pub/cd/8000cd/napdos/modbus/mdc700/document/ What’s in the Box? The package includes the following items: Screw Driver RS-232 Cable (1C016) 2.4 mm (CA-0910) ...
- Page 2 Connecting to PC, Network and Power The module is equipped with a standard Ethernet port (RJ-45) for connecting to an Ethernet Hub/Switch and PC. Moreover, you can also connect the PC directly with an Ethernet cable. ...
- Page 3 NOTE: Details on how to change the IP address on your computer depend upon the type architecture and operating system you are using. Use the computer Help and Support functionality to search for “IP Addressing”. STEP 3: Open a web browser and go to the website at http://192.168.255.1, where 192.168.255.1 is the IP address in your MDC module.
- Page 4 NOTE: The MDC-700 can be reset to factory defaults by shorting the RESET pin to GND pin over 3 seconds. The LED display will show “RESET” as below and the IP address set previously will be removed. STEP 6: Restore the IP address for your computer. Go to the Web Site Go to the web interface at http://xxx.xxx.xxx.xxx, where xxx.xxx.xxx.xxx is the IP address for your MDC-700.