2.2. Mounting the PET-AR400
PET-AR400 comes with a guide rail clip that makes it easy to install on a standard 35 mm DIN rail.
Step 1:Hook the upper tab over the upper flange of the DIN-Rail
Step 2:Tilt the module toward the DIN-Rail until it snaps securely to rail
Tips & Warnings
To remove the module from DIN-Rail
Gently press down on the module and then pull the bottom of the module away
from the DIN-rail clip to remove it.
Press down on
the module
PET-AR400 User Manual
Pull the module away from the DIN-rail
V1.0.0
Top
P.19