ICP DAS USA MDC-714i User Manual page 54

2
4
Step 3: Look for the connector symbol at the upper right-hand corner of the MiniOS7 Utility to
ensure the connection is made
If the connection fails, make sure that:
 An Ethernet cable is connected securely to both the MDC-700 and your computer
 The MDC-700 is active (powered on)
The IP address of MDC-700 is correct

 No firewall is blocking the connection
Step 4: Delete the original files from the MDC-700
After establishing a connection, select "Erase Disk" from Command menu (or right-click
on the right of window) to delete all files existed on the MDC-700.
Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E-mail: service@icpdas.com
3
Connection successful
- 54 -