In Using - Pylontech Force-H2-V2 Manual

1.2 Before Connecting
1) After unpacking, please check product and packing list first, if product is damaged
or lack of parts, please contact with the local retailer;
2) Before installation, be sure to cut off the grid power and make sure the battery is
in the switched-off mode;
3) Wiring must be correct, do not mistake the positive and negative cables, and
ensure no short circuit with the external device;
4) It is prohibited to connect the battery and AC power directly;
5) Battery system must be well ground and the resistance must be less than 100mΩ;
6) Please ensured the electrical parameters of battery system are compatible to
related equipment;
7) Keep the battery away from water and fire.

1.3 In Using

1) If the battery system needs to be moved or repaired, the power must be cut off and
the battery is completely shut down;
2) It is prohibited to connect the battery with different type of battery.
3) It is prohibited to put the batteries working with faulty or incompatible inverter;
4) It is prohibited to disassemble the battery (QC tab removed or damaged);
5) In case of fire, only dry powder fire extinguisher can be used, liquid fire
extinguishers are prohibited;
5