Control Module Fc0500M-40S-V2 (Internal Power Supply) - Pylontech Force-H2-V2 Manual

2.2.3 Control Module FC0500M-40S-V2 (internal power supply)

Control Module (FC0500M-40S-V2) Display Panel
LED Button
Short Press
Long Press 1
(between 5 to
10 seconds)
Display the LED panel for 20sec.
When status LED fast flashes blue ●, loss the
button, then it is 115200 baud rate of RS485.
When status LED fast flashes orange ●, loss the
button, then it is 9600 baud rate of RS485.
If a special protocol (except Pylontech Protocol), is
selected follow 'Long Press 2', then the baud rate
changing described here is ineffective.
Long Press 2
Communication Protocol Selection, for details
(more than
please check with Pylontech service team
10sec)
11