Safety Information; Warnings - Linak TECHLINE ELEVATE - LC3 IC User Manual

Safety information

Please read this safety information carefully:
Be aware of the following three symbols throughout the user manual:
Warning!
Failing to follow these instructions can cause accidents resulting in serious personal injury�
Recommendations
Failing to follow these instructions can result in the product suffering damage or being ruined�
Additional information
Usage tips or additional information that is important in connection with the use of the product�

Warnings

Not to be used horizontal
•
The product is NOT to be opened by unauthorised personel
•
Always check correct assembly after mounting and service to ensure that the cable locks are
•
mounted
Ensure that the cable cannot be squeezed, pulled or subjected to any other stress or damages
•
LC3 IC is heavy (more than 20 kg)� To avoid personal injury and product damage, DO NOT DROP!
•
Take special precautions concerning 3rd party interfacing� If needed, please contact LINAK for
•
further information
Do not adjust anything during movement or while connected to mains, it can cause personal
•
injury�
To avoid cable interruption and column defects make a proper cable installation and inspect
•
regularly for wear, damage and jarring sound� Defective parts must be replaced
After service inspection, the application must be tested for correct functionality before it is put
into operation� If used in parallel applications, misalignment between two or more columns must
•
be avoided
Do not loosen any screws on the LC3 IC, this can cause collapse of the column!
•
All cables must remain plugged in during cleaning to prevent the ingress of water�
•
The lifting column can become functional safety systems compliant with EN ISO10218-2�
To integrate the LC3 IC into a functional safety chain, external safety devices such as Safety
•
contactors/relays havs to be implemented
Lifting Column LC3 IC | 5