DL18 IC and DL19 IC | Contents Preface ������������������������������������������������������������������������������������������������������������������������������������������ 3 Important safety information ��������������������������������������������������������������������������������������������������������� 4 Informations importantes en matière de sécurité ���������������������������������������������������������������������������� 5 The DESKLINE system ������������������������������������������������������������������������������������������������������������������� 6 ® Intended use ����������������������������������������������������������������������������������������������������������������������������� 6 Warranty ���������������������������������������������������������������������������������������������������������������������������������� 6 Products ������������������������������������������������������������������������������������������������������������������������������������ 7 Safety instructions �������������������������������������������������������������������������������������������������������������������������� 8 Important safety instructions������������������������������������������������������������������������������������������������������...
This User Manual does not address the end user� It is intended as a source of information for the equipment or system manufacturer only, and it will tell you how to install, use and maintain your LINAK electronics� The manufacturer of the end product has the responsibility to provide a User Manual, where relevant safety information from this manual is passed on to the end user�...
Failure to comply with instructions marked with the ”NOTICE” symbol may result in serious damage to the system or one of its components� Read all instructions before using this product� Important safety information on LINAK products can be found under the following heading(s): ®...
Le non-respect des instructions marquées du symbole “AVIS” peut entraîner de graves dommages au système ou à l’un de ses composants� Lisez toutes les instructions avant d’utiliser ce produit� Des informations de sécurité importantes sur les produits LINAK sont disponibles dans la ou les rubriques ®...
Altitude Max� 2000 m Do not use outdoors or in wet areas� Do not use it in environments that have to be cleaned with aggressive detergents� Warranty The warranty terms for DESKLINE products are described in this warranty paper: https://cdn�linak�com/-/media/files/warranty/warranty-paper-deskline-eng�pdf...
DL18 IC and DL19 IC | Products DESKLIFT™ columns DL18 IC DL19 IC • 2-part PLUS™ column • 3-part column • PLUS™ (option) Switch Mode Power Supply (SMPS) SMPS001 SMPS002 SMPS006 SMPS007 • 230 V AC • 120 V AC •...
DL18 IC and DL19 IC | Safety instructions Important safety instructions General DANGER Plugged-in products Risk of electric shock • Always unplug this product from the electrical outlet before assembling, disassembling, cleaning, or servicing� • Only use the product indoors in dry locations� WARNING General precautions Risk of burns, fire, electric shock, or injury to persons...
® In order to avoid the risk of malfunction, all DESKLINE repairs must only be carried out by authorised LINAK ® workshops or repairers, as special tools must be used and special gaskets must be fitted� Lifting units under...
Page 10
DL18 IC and DL19 IC | 10 WARNING • This appliance can be used by children aged from 8 years, and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved�...
DL18 IC and DL19 IC | 11 Consignes importantes de sécurité AVERTISSEMENT • Cet appareil peut-être utilisé par des enfants âgés de 8 ans et plus, ainsi que les personnes dont les capacités physiques, sensorielles ou mentales sont réduites ou ayant un manque d´expérience et de connaissance si elles ont bénéficié...
LINAK A/S Smedevænget 8 DK - 6430 Nordborg hereby declares under our sole responsibility that LINAK Actuator System, model: DLIC, for use in elevation tables: with main component (marked with CE): Lifting Column with integrated control, DLIC (Master, M): DLXXXXXXMXXXXXX...
Page 13
EU DECLARATION OF CONFORMITY LINAK A/S Smedevænget 8 DK - 6430 Nordborg Hereby declares under our sole responsibility that LINAK ® Switch Mode Power Supply, type SMPS006 (ASW0552-29020002B) and SMPS001 (ASW0539-24020002A) complies with the EMC Directive 2014/30/EU (OJ L 96, 29.3.2014, p. 79–106) according to following standards:...
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY LINAK A/S Smedevænget 8 DK - 6430 Nordborg Herewith declares that LINAK DESKLINE products as characterized by the following models and types: ® Master and follower: DLXXXXXXMXXXXXX and DLXXXXXXSXXXXXX Desk Panels: DP1C, DP1K, DPT, DPB, DPF, DP1L, DP1V, DPA, DPH, DP1U, WDPL1, DPG Power supply: SMPS006, SMPS001 Accessory: KNC1a00bbcdddd-eeee, where a can be 0 or 1;...
WARNING Plastic bags Risk of suffocation • Keep the plastic bags away from babies and children� LINAK recommends using the DESKLINE system in push applications with the motor housing ® mounted upwards� Do not bolt the coluimns to the floor so that free movement is obstructed� This could cause serious damage to the columns in fault situations�...
DL18 IC and DL19 IC | 16 Mounting the feet On-top or recessed The bottom plate has four M6 and two M8 threaded holes� 1� Mount the desk foot on the column bottom using four M6 or two M8 screws with the following specifications: Quality: Min�...
Page 17
DL18 IC and DL19 IC | 17 1� Mount the feet on the columns using supplied screws� Max� torque:10 Nm� 2� Mount the adjustment screws�...
Page 18
DL18 IC and DL19 IC | 18 Click-on option for DL19 IC PLUS™) The column is delivered with two pre-mounted mounting screws� Mounting 1� Align the holes in the foot with the screws on the column� 2� Press down quickly until a ‘Click’ is heard�...
DL18 IC and DL19 IC | 19 3� Ensure that locking plates snap inwards and lock the screws� The foot is now mounted on the column� Disassembly 1� Unscrew the two M8 screws until both mounting screws are loosened completely� Switch between the two screws after approximately five turns�...
DL18 IC and DL19 IC | 20 Column with bracket When mounting a crossbar or a cross member on a bracket, it is important to ensure that the bracket is not pulled from the column when tightening the crossbar / cross member� Follow these guidelines when constructing a desk: Do not pull the bracket from the column when tightening the screws for the assembly�...
DL18 IC and DL19 IC | 21 Mounting the tabletop The sound from the lifting column spreads as vibrations to the tabletop which amplifies the sound� This can, however, be reduced� 1� Place vibration/shock-absorbing material between tabletop and top frame� Figure 6 Assembled desk Placing the monitor Placement of a monitor directly above the motor housing may cause malfunction of the monitor�...
DL18 IC and DL19 IC | 22 Mounting the locking device (SMPS001/SMPS002) To ensure optimal cable relief on the SMPS001/002 a locking device (0705889) should be used� Follow the guide below on how to fix the locking device on the SMPS� 1�...
DL18 IC and DL19 IC | 23 Mounting the bracket (SMPS006/SMPS007) A bracket for mounting the SMPS006 onto the application to give a fixed placement and ensure cable relief for the mains cable� Must be ordered separately (SA0705890)� The bracket must be fastened with two wood screws with a pan head�...
DL18 IC and DL19 IC | 24 Connection Items required: Motor cable Desk panel (example) SMPS + cable 1� Connect the control and companion columns using the motor cable� 2� Mount the desk panel onto the desk and connect it to the control column� 3�...
DL18 IC and DL19 IC | 25 Operation This document describes the DESKLIFT™ column system� For more information on the operation of the system, please refer to the relevant desk panel/control User Manual which is availble here: ttps://www�linak�com/user-manuals/deskline/�...
DL18 IC and DL19 IC | 26 Maintenance Clean dust and dirt from the outside of the system at appropriate intervals and inspect for damage and breaks� Inspect connections, cables, and plugs without disconnecting, and check functioning as well as fixing points� CAUTION Loose screws Risk of loss of stability...
LINAK service centre� In order to avoid the risk of malfunction, all product repairs must only be carried out by an authorised LINAK Service shop or repairers, as special tools and parts must be used�...
LINAK, LINAK subsidiaries, or LINAK affiliates. the same reason, LINAK cannot guarantee the correctness and actual status of imprinted information on All sales are subject to the ‘Standard Terms of Sale and Delivery for LINAK A/S’ available on LINAK websites. its products.
Need help?
Do you have a question about the DESKLINE DL18 IC and is the answer not in the manual?
Questions and answers