Table of Contents
Advertisement
Chapter 2
Configure the ASCII Module
20
•
Set the data bits, stop bits, and parity in data character frames. For more
information about data character frames, see
•
Configure serial port receive and transmit data modes and delimiters.
For more information about receive and transmit data settings, see
Parameter List on page
Advance Format Configuration Category
The Advance Format Configuration category lets you complete the following
tasks:
•
Set the receive and transmit data swap bytes modes. For more
information about Swap Bytes modes, see
Mode on page
•
Set the receive and transmit handshake modes. For more information
about Handshake modes, see
Handshake Option on page
•
Enable or disable Pad Mode. For more information about pad mode, see
Pad and No Pad Option on page
•
Define the receive pad character. For more information about pad
characters, see
Rockwell Automation Publication 1734-UM009C-EN-P - August 2022
25.
28.
Produce Immediate and Master/Slave
12.
12.
Pad and No Pad Option on page
Parameter List on page
Set Up and Use the Swap Bytes
12.
25.
Advertisement
Table of Contents
