Connection Category - Rockwell Automation Allen-Bradley 1734-232ASC Original Instructions Manual

Point i/o ascii modules

Hide thumbs

Table Of Contents

Table of Contents

Chapter 2

Configure the ASCII Module

Table 6 - Module Definition Parameters

Parameter

Series

Revision

Electronic Keying

Connection

Receive Mode

Transmit Mode

Data Format

Channel Parameters

(1) The range of available choices varies by module type.

(2) In Listen Only connection, the controller and module establish communication without the controller sending any configuration or output data to the module. A full input data connection is established

but depends on the connection between the owner-controller and the module.

Definition

Module hardware series

Module firmware revision, including major and minor revision levels

Software method by which you reduce the possibility of using the wrong device in a control system.

For more information, see the following:

•

Electronic Keying on page 13

• Electronic Keying in Logix 5000 Control Systems Application Technique, publication

Determines the following for the module type you configure:

• Available configuration parameters

• Data type transferred between the module and the controller

• Which tags are generated when configuration is complete

Input data for the module that is being defined.

Output data for the module that is being defined.

Module data format transferred between module and controller.

Maximum number of characters that the ASCII module expects to receive and transmit.