Table of Contents
Advertisement
Setting Up Communications Between the PLC and the HI 1734-WS in DeviceNet
When setting up the HI 1734-WS in a DeviceNet network, download and use the EDS file found on the Hardy
Website at
http://www.hardysolutions.com
Weigh Scale Module. Click on the Docs & Programs tab to locate and download the EDS file.
Install the EDS file the EDS Hardware Installation Wizard found in the RS Networx for DeviceNet.
Once installed, browse the DeviceNet network for the HI 1734-WS module and add the module to the scanlist for
the DeviceNet network.
Configuration Parameters
The following parameters are parameters used in the Configuration of the IO:
Page | 22
>Products >PLC Weighing Modules >Weight Modules >1734-WS
Configuration
Parameters
Gravity Correction
Motion Tolerance
Zero Tolerance
Tare Weight
Reference Weight
Span Weight
AutoZeroTolerance
Enable AutoZero Tracking
Unit
Load Cell Sensitivity
WaverSaver
Num Averages
Hardy 1734-WS Installation & Operation Manual
Data Type
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
FLOAT
INT
INT
INT
INT
INT
Advertisement
Table of Contents
