Table of Contents
Advertisement
Chapter 2
Configure the ASCII Module
View the Module Tags
When you create a module, the Studio 5000 Logix Designer application creates
a set of tags that you can view in the Controller Tags. Each configured feature
on your module has a distinct tag that is available for use in the controller
program logic.
Complete the following steps to access the module tags.
1. In the Controller Organizer, right-click Controller Tags and choose Monitor
Tags.
The Controller Tags dialog box appears with data.
2. To view module tags as shown, click the
symbols.
For more information on module tags, see
Module Tag Definitions on page
23.
Rockwell Automation Publication 1734-UM009C-EN-P - August 2022
21
Advertisement
Table of Contents
