Table of Contents
Advertisement
Edit the Module
Configuration Categories
Once added to the network, you must configure the module for use. The
1734-485ASC and 1734-232ASC modules are configured identically.
This chapter shows configuration in the offline mode. Changes set in this
IMPORTANT
mode take effect when you download to the individual module.
You click the category names in the New Module dialog box to view and change
the configuration parameters that are associated with that module.
IMPORTANT This chapter shows how to edit configuration when you add the module to
the Studio 5000 Logix Designer application project.
If you access the module configuration after it has been added to the
project, the dialog box is named Module Properties. The Module Properties
dialog box shows the same categories as the New Module dialog box.
Some new module configuration categories apply to all POINT I/O modules.
Some categories are specific to the module type.
For example purposes, the figures in this section are from a
1734-485ASC module.
The following categories apply to all POINT I/O ASCII modules and are
described in this section:
•
General Category
•
Connection Category
•
Module Info Category
•
Configuration Category
•
Advance Format Configuration Category
General Category
The General category appears first when you create a module. The parameters
in this category are the same for all POINT I/O ASCII modules.
You use this category to complete the following tasks:
•
Name the module
•
Assign a slot number (required)
•
Describe the module
•
Access the Module Definition
Module Definition
Module Definition parameters are available on the General tab of the Module
Properties dialog box in the Studio 5000 Logix Designer application project.
Table 6
describes the parameters on the Module Definition dialog box.
IMPORTANT The graphic is an example of a Module Definition dialog box. The same set
of fields and options are not available on all POINT I/O modules.
Rockwell Automation Publication 1734-UM009C-EN-P - August 2022
Chapter 2
Configure the ASCII Module
17
Advertisement
Table of Contents
