Cortex Mcs Software; Cortex Mcs Software For Satcore Direct Configuration; Figure 15: Cortex Mcs S - Safran SATCORE Series User Manual

SATCORE SERIES
USER's MANUAL
3.2.3

Cortex MCS Software

The Cortex MCS software is the legacy monitoring & control interface for Cortex Series. It is a separate software
application that communicates with Cortex product through the Cortex TCP/IP interface. This software can be
installed directly on the Cortex product or on a remote computer. The installer is available on the Satcore Software
installation CD-ROM. Refer to documents [RD8] and [RD6] for a detailed description of this software.
The Satcore products are compatible with Cortex TCP/IP interface, and consequently with Cortex MCS software.

3.2.3.1 Cortex MCS Software for Satcore Direct configuration

In the case of Satcore Direct, where both Cortex CRT and HDR products are sharing the TCP/IP interface,
the Cortex MCS Software shall be configured for multiple-product connection. Only the version delivered
in the Satcore Direct software installation is compatible with this configuration. Do not try to use Cortex
CRT only MCS software, or Cortex HDR onlt MCS software, as delivered for Cortex Series.
After connection, the Cortex MCS software shows two windows: the main window of the Cortex CRT (left
hand side of the screenshot below), and the main window of the Cortex HDR (right hand side of the
screenshot). The use of each of these windows are the same than the ones described in Cortex
documentation. If the user has shut down one of the window, an icon is available on the navigation toolbar
for reopening the window:
- Cortex CRT:
- Cortex HDR:
The navigation toolbar is common to the two products. Each administrative action will affect at the same
time the Cortex CRT and the Cortex HDR: menu change, CTX document loading, logging, password
protection...
Figure 15: Cortex MCS Software for Satcore Direct configuration
ZODIAC DATA SYSTEMS PROPRIETARY
D102751
ZDS Ref : Issue : 1 Rev.: 0
Date : July 11, 2019
Page 49