Safran SATCORE Series User Manual page 14

SATCORE SERIES
USER's MANUAL
Markings are placed at the rear of the unit, regarding the power ratings and
The symbol on the PC chassis indicates that it is in compliance with the Electromagnetic
Compatibility directive (2006/95/EC) and the low Voltage directive (IEC60950-1/A1:200973/23/CEE) . A
certificate of compliance is available by contacting technical support. This equipment is a:

Group 1 Class A product
Recommendation concerning the cabling :
CE certification has been carried out with 3-meter interconnecting cables with remote equipment.
ZODIAC DATA SYSTEMS recommends the use of high quality interconnecting cables type. The high
quality recommended user interconnecting cables are "shield twisted pair" or "coaxial cable" industrial type
with cable shield. The cable shield will provide the necessary mechanical protection.
Not using this high quality designed cable could result in unexpected intersystem/extrasystem
electromagnetic emission and susceptibility.
Markings are placed at the rear of the unit and on all electronic subassemblies, regarding the WEEE
directive :
DO NOT place the used equipment in regular waste bins.
All equipment marked with this logo must be recycled by an approved Waste Electrical and Electronic
Equipment processing facility. If desired, the equipment can be returned at the customers expenses to
Zodiac Data Systems for proper recycling, after asking for a RMA by sending a request to http://www.zds-
fr.com/en/locations-contacts/contactsen/contacts.html. Please consider the environmental cost of
transportation of the used equipment and preferably use a local WEEE processing facility.
France, Canada: L'appareil doit être connecté à une prise de terre
Suomi: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan
Norge: Apparatet ma tilkoples jordet stikkontakt
Sverige: Apparaten skall anslutas till jordat uttag
ZODIAC DATA SYSTEMS PROPRIETARY
CE MARKING
WEEE DIRECTIVE
INTERNATIONAL SECURITY STATEMENT
D102751
ZDS Ref : Issue : 1 Rev.: 0
Date : July 11, 2019
compliance.
Page 12