Rename Workstation - Safran SATCORE Series User Manual

SATCORE SERIES
USER's MANUAL
3.4.4.2.2 C IP
HANGE ADDRESS
This feature allows to change the IP Address, the Subnet Mask and the Gateway Address in "Static" mode. Refer
to previous chapter for setting the LAN mode in Static.
From Main menu, press the "Enter" button three times to access successively to the "System" menu and the
"Network" menu.
Use "Left" and "Right" buttons to select the parameter to be changed (IP, Mask or Gateway)
Press the Enter button to start the modification
Use "Left" and "Right" buttons to select the character to be changed and use the "Up" or "Down" buttons to change
the value.
In order to apply the configuration, leave the Network menu by pressing the "Return" button. Note that no
computer reboot is needed.

3.4.4.3 Rename WorkStation

This feature allows to change the name of the workstation.
From Main menu, press the "Enter" button twice to access to the "System" menu. Press three times the "Right"
button, then press the "Enter" button to access to the "Rename Workstation" submenu.
Press the "Enter" button to begin the modification.
Use the "Right" or "Left" buttons to select the character to be changed, use the "Up" and "Down" buttons to change
the value. Only characters from ASCII table from 0x21 : '!' to 0x7A 'z' are available.
To end the name of the workstation, select the NULL character (before '!' or after 'z')
Press the "Enter" button to confirm.
The computer will reboot 120s later to take the new name into account.
ZODIAC DATA SYSTEMS PROPRIETARY
ZDS Ref :
, S N M G
UB ET ASK OR
D102751
A S
ATEWAY DDRESS IN
Issue : 1 Rev.: 0
Date : July 11, 2019
TATIC MODE
Page 75