Safran SATCORE Series User Manual page 70

SATCORE SERIES
USER's MANUAL
3.3.2.4.4.2 T
ELEMETRY CHANNEL DESCRIPTION
 IF In: IF carrier level. Expressed in dBm. In FM mode, gives the signal level measured in the 1-MHz IF
bandwidth.
 Eb/No: Energy per bit in a 1-Hz noise bandwidth, measured at the bit synchronizer input. Expressed in
dB.
 Carrier: Current carrier status: On or Off. Should reflect programming parameter Carrier.
 Bit Sync.: Bit Synchronizer status: Locked (dark blue) or Unlocked (light blue).
 Decoder: Viterbi decoder status: Locked (dark blue) or Unlocked (light blue).
 Frame Sync.: Frame Synchronizer status: Locked (dark blue) or Unlocked (light blue).
 Input Port: IF input port selection.
 FC: Frame Counter.
 BF: Number of Bad Frame.
 GF: Number of Good Frame.
 Drop Out Frame: Number of Drop Out Frame.
3.3.2.4.4.3 T
ELECOMMAND CHANNEL DESCRIPTION
 IF Out: IF carrier level. Expressed in dBm.
 Carrier: On or Off
 Sweep: Sweeping status: On or Off or Auto or Auto+RZ or RZ.
 Idle: Start or Stop the Idle generator.
3.3.2.4.5 T
ACHIEVED ASK
When the session reached the stop date, all data are received and available for download into the "MyData" page.
This operation needs the installation and configuration of a FTP server. A "FileZilla" installer is available on the
Generic Software installation CD-ROM provided with the unit.
3.3.2.4.6 C
ORRUPTED
When a task encounters a problem, its status change to Error and the background color of its body turns red.
Moreover, the task name turns also in red.
ZODIAC DATA SYSTEMS PROPRIETARY
T
ASK
D102751
ZDS Ref : Issue : 1 Rev.: 0
Date : July 11, 2019
Page 68