Live Page; Figure 21: Live Page Example - Safran SATCORE Series User Manual

SATCORE SERIES
USER's MANUAL

3.3.1.5 Live page

The Live page allows monitoring the real-time state of the Satcore. Main signal processing parameters and status
are displayed and distributed in main function boxes.
This page is divided in three parts: the high-level "Status" part, the detailed status list part and the charts part.
1
3.3.1.5.1 S P
TATUS ART
This part of the Live page regroups the high-level status of the scheduling functionality

Scheduler status: is the real-time scheduler status

Current SAT Configuration: is the last loaded satellite configuration label
3.3.1.5.2 T
HE DETAILED STATUS LIST
This part presents a selection of the main status and extra-parameters of the current configuration. This
information is divided into several high-level boxes, stored by category:

RF Parameters : including RF frequencies and input ports

System : including alarms, temperatures and time decoder status

Payload Demodulator (only for Satcore Direct and RX) : including carrier offset, demodulation, IF Level

Payload Data Processor (only for Satcore Direct and RX) : including frame synchronization status

TTC Demodulator (only for Satcore Direct and Modem) : including carrier offset, demodulation, IF Level

TTC Data Processor (only for Satcore Direct and Modem) : including frame synchronization status
ZODIAC DATA SYSTEMS PROPRIETARY
ZDS Ref :
3

Figure 21: Live page example

D102751
Issue : 1
Date : July 11, 2019
2
Rev.: 0
Page 55