Safran SATCORE Series User Manual page 12

SATCORE SERIES
USER's MANUAL
Opening of the product chassis
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside ; the product chassis should only be opened by
qualified personnel for maintenance purpose ( except for opposite instructions in the
user's manual ).
Technical Maintenance
Refer all servicing to qualified maintenance personnel. Servicing is required when apparatus
has been damaged in any way, such as power supply cord is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
The qualified maintenance personnel must take reasonable precautions to face the
obvious DANGERS.
Powers sources
Only connect the apparatus to a power supply of the described in the operating instructions or
as marked on the apparatus.
Turning off the power switch does not completely isolate this product from the power line so
remove the plug from the socket if not using it for extended period of time.
Unplug this apparatus during lightning storms.
Power cord protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords and plugs, and the
point where they exit from the appliance
Grounding
WARNING : this apparatus shall be connected to a mains socket outlet with a
protective earthing connection.
The appliance must be connected to an electrical ground and the power cord is
designed for that.
Power supply cable and socket
This apparatus must be used with a power supply cable of 1 mm
The power supply socket must be located at a distance of less than 1.5 m from the
equipment and easily accessible
ZODIAC DATA SYSTEMS PROPRIETARY
D102751
ZDS Ref : Issue : 1 Rev.: 0
Date : July 11, 2019
2
section minimum
Page 10