Section 7
iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation
iVIZION2 Operational Flowchart; Validation
Figure 23 iVIZION2 Operational Flowchart;
Validation
A
a
YES
b
NO
c
d
YES
f
g
NO
YES
h
k
l
NO
C
*1 When Abnormal Output Signal condition occurs, remove the Banknote causing the malfunction and re-apply power to the Unit, or send a Reset
Command to the Banknote Validator.
*2 When a Stacker Full signal occurs, remove the Banknotes from the Cash Box and re-install it into its fully seated position. The Unit will the
automatically re-initialize itself.
P/N 960-000231R_Rev. A
NO
YES
e
NO
i
NO
YES
j
YES
m
Figure 23 iVIZION2 Operational Flowchart; Validation
A) Begin Validating
a) Is Validation Result OK?
b) Is Banknote Unacceptable?
c) Output the Denomination Value Signal
d) Receive Stacking Command?
e) Reject Banknote
f) Continue Transporting Banknote
g) Is Banknote sent to Stacker?
i) Retry 3 times?
h) Output a VEND Signal
j) Stop Performance: Output Abnormal
Signal (*1)
k) Banknote Stacking
l) Is Stacker Full?
m) Stop Performance: Issue Output Stacker
Full Signal (*2)
C) Return To Stand-by Mode (Figure 22).
© 2022, JAPAN CASH MACHINE CO., LTD.
3 0
Operational Flowcharts