Led Error Codes; Icb - JCM GLOBAL iVIZION2 Series Integration Manual

Troubleshooting iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation
Status LED Error
Anti-Stringing Error
Red Flashes
Fraud detected.
(12)
Red
Reserved
Flashes
(13)
Damaged PCB
An IC is
Red Flashes
malfunctioning
(14)
ROM/RAM Error
A ROM or RAM is
Red Flashes
malfunctioning
(15)

LED Error Codes; ICB

Status LED
RFID Module Error
Unable to communicate
Blue Flashes
with RFID
1 Time
ICB Function
(Settings) Error
Blue Flashes
The ICB Function Setting
2 Times
is incorrect
ICB R/W Error
Unable to communicate
Blue Flashes
with ICB
(3)
ICB Data Error
Blue Flashes
Incorrect ICB Data
(4)
ICB Number Error
The number of the Game
Blue Flashes
Machine is differrent
(5)
ICB Initialize Error
The Cash Box has not
Blue Flashes
been reset
(6)
P/N 960-000231R_Rev. A
Table 21 LED Error Codes; General (Continued)
•
Check that there is any trace of fraud activity
such stringing.
•
Check that the relative Part(s) are properly
assembled and/or Harness are connected.
•
Clean and calibrate the relative Sensor(s).
•
Replace the relative PCB(s) if necessary as
they may be damaged.
•
Replace the CPU Board if necessary as it
fails to start.
Table 22 LED Error Codes; ICB
Error
•
Check that the relative Part(s) are properly
assembled and/or Harness are connected.
To enable the ICB Function:
•
Enable the ICB Function.
•
Reset the Cash Box.
•
Replace the relative Part(s) if the solutions
above does not resolve the error.
To disable the ICB Function:
•
Disable the ICB Function.
•
Set the Cash Box to INHIBIT.
•
Replace the relative Part(s) if the solutions
above does not resolve the error.
•
Check that the RFID Transmitter and
Module in the Cash Box perform properly.
•
Replace the relative Part(s) if the solutions
above does not resolve the error.
•
Replace the Cash Box with a cleared Cash
Box
•
Replace the relative Part(s) if the solutions
above does not resolve the error.
•
Replace the Cash Box with the one that has
been reset or has the matching machine
number.
•
Replace the relative Part(s) if the solutions
above does not resolve the error.
•
Replace the Cash Box with the one that has
been reset.
•
Replace the relative Part(s) if the solutions
above does not resolve the error.
Solution
-
Solution
© 2022, JAPAN CASH MACHINE CO., LTD.
3 3
Section 8
Relative Part/Sensor
•
String Detection Sensor
-
•
CPU Board
•
MGU Board
•
CIS Board
•
Transport Encoder Board
•
Stack Encoder Board
•
Stack Home Position Sensor
Board
•
CPU Board
Relative Part/Sensor
•
RFID Module
•
CPU Board CN12
•
MGU Board CN6
•
RFID Module
•
CPU Board CN12
•
MGU Board CN6
•
RFID Module
•
CPU Board CN12
•
MGU Board CN6
•
RFID Module
•
CPU Board CN12
•
MGU Board CN6
•
RFID Module
•
CPU Board CN12
•
MGU Board CN6
•
RFID Module
•
CPU Board CN12
•
MGU Board CN6