Preventive Maintenance; Retrieving Banknotes; Clearing A Banknote Jam; Cleaning - JCM GLOBAL iVIZION2 Series Integration Manual

Preventive Maintenance iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation
5

PREVENTIVE MAINTENANCE

This section provides the preventive maintenance
of the iVIZION™2 Series Banknote Validator
(iVIZION2).
•
Retrieving Banknotes (p. 21)
•
Clearing a Banknote Jam (p. 21)
•
Cleaning (p. 21)

Retrieving Banknotes

1. Remove the Cash Box from the Frame.
2. Unlock the Cash Box with a key.
3. Open the Cash Box Door and remove Banknotes.
Figure 11 Retrieving Banknote
Remove
Figure 11 Retrieving Banknote

Clearing a Banknote Jam

1. Open the Validator Unit's Upper Guide by press-
ing in on the two (2) Upper Guide Access Levers
(Front) (Figure 12 a), and lift the Validator top up
and open.
2. Remove the jammed Banknote. If the jammed
Banknote is not found in there, go to Step 3.
3. Open the Transport Unit's Upper Guide by press-
ing in on the Upper Guide Access Lever (Figure
12 b) located in the center of the Upper Guide,
and lift the Transport Section up and open.
4. Remove the jammed Banknote. If the jammed
Banknote is not found in there, go to Step 5.
Figure 12 Clearing a Banknote Jam 1
Open
a
Remove
Figure 12 Clearing a Banknote Jam 1
P/N 960-000231R_Rev. A
b
Open
Remove
2 1
5. If the jammed Banknote is not found in the
higher Sections, pull the Cash Box out of the
Frame (Figure 13 a).
6. Check at the rear side of the Frame and remove
the jammed Banknote located there if any.
7. A jammed Banknote may also be present on top
of the Cash Box; remove it if present at this 
location.
Figure 13 Clearing a Banknote Jam 2
Remove
a
Pull Out
Figure 13 Clearing a Banknote Jam 2

Cleaning

Use a dry, soft, lint-free cloth or a Cotton swab to
wipe dirt and stains.
If necessary, blow the inside of the Unit clean with
a non-flammable compressed air and remove cling-
ing foreign objects.
WARNING: Be sure to use non-
flammable compressed air only.
WARNING: DO NOT let liquids or fluids
drip into the Unit's interior; otherwise,
the Unit may not operate correctly.
CAUTION: To keep the iVIZION2 Unit
performance optimal, perform routine
cleaning and maintenance:
•
At least once a month; and/or
•
Whenever Sensors, Belts, Rollers or
Banknote Path are dirty due to dust, foreign
objects or similar debris adhering to them.
CAUTION: Do not use alcohol, thinner
or citrus based products for cleaning
any Sensors or surfaces on a Banknote
Path. The lenses can become clouded
by chemical evaporation residue that
may cause acceptance errors.
© 2022, JAPAN CASH MACHINE CO., LTD.
Section 5
Remove