Configuring Wi-Fi - AudioCodes 400HD Series User's And Administrator's Manual

CHAPTER 3 Starting up
Setting

Configuring Wi-Fi

[Applies to devices whose PN indicates DBW ] Network administrators can configure Wi- Fi
parameters for the phone. The parameters are concealed from the user's view.
Additionally, network administrators can configure Wi-Fi settings via the Configuration File. The
Wi-Fi settings application on the device and the Configuration Database are synchronized.
Use the following table as reference.
Only applies to the C450HD phone.
Parameter
network/wifi_enabled
network/wifi_pc_bridge
network/wifi_ipv4_method
network/wifi_channel_mode
Switch to Teams Compatible (not applicable to the C448HD phone)
Factory data reset (the equivalent of restore to defaults; including
logout and device reboot)
ADB (Android Debug Bridge command-line tool used to debug the
Teamsapp); the setting is disabled by default. The device does not
allow access to ADB.
Screen Capture. By default, this setting is enabled. If it's disabled, the
phone won't allow its screens to be captured.
Table 3-2: Wi-Fi Parameters
Enables/disables the Wi-Fi feature.
Enables network connectivity for the PC
behind the phone; for debugging purposes.
Defines the Dynamic or Static IP address for
Wi-Fi.
Enables the Wi-Fi channel mode:
■ 2.4G only
5G only
■
■ 2.4G+5G
- 34 -
C448HD C450HD | Users & Administrator's Manual
Description
Description Values
0 (disable,
default)
1 (enable)
0 (disable,
default)
1 (enable)
DHCP
(default)
STATIC
5G_2_4G
(default)
2_4G_
ONLY
5G_ONLY