CHAPTER 6 Performing Administrator-Related Operations
This URL is displayed in the Device Manager page under Setup > DHCP Options Configuration.
After devices are added to the Device Manager, they're allocated to tenants by selecting
Change Tenant in the 'Actions' menu. Unless already used, it's recommended to leave the
default tenant as a 'lobby' for the new devices. The above URL can also be configured in
AudioCodes' Redirect Server. Android-based Teams devices currently support:
Provisioning of configuration
■
■
Provisioning of firmware
■
Switching to UC / Teams
■
Monitoring (based on periodic Keep-Alive messages sent from devices)
■
Resetting the device
The Device Manager's 'internal' functions (which don't involve devices) are:
■
Change tenant
Change template
■
■
Show info
Generate Configuration
■
■
Delete device status
■
Nickname
Actions that go beyond the devices' periodic provisioning cycle will be supported in next
releases. The Check Status option is irrelevant for Android-based Teams devices therefore it's
omitted from the 'Actions' menu.
●
●
Configuring a Periodic Provisioning Cycle
Network administrators can configure how often periodic provisioning cycles will occur, to suit
enterprise management preference.
➢ To configure how often periodic provisioning cycles will occur:
■
Use the following table as reference.
To change a device's configuration, see the Device Manager Administrator's
Manual. Changing a device's configuration using the Device Manager is the
same for Android-based Teams devices as for UC devices.
To commit a change made at the template/tenant/site/group/user level, perform
Generate Configuration. The change can be validated in the device's .cfg file.
The Android-based endpoint pulls the updated configuration when the next
periodic provisioning cycle occurs.
C448HD C450HD | Users & Administrator's Manual
- 99 -