Options And Sample Devices; External Printer - HunterLab ColorFlex EZ User Manual

Options and Sample Devices

There are many options and devices available for positioning samples at the measurement port
of the ColorFlex EZ and for making the instrument easier to use. Any or all of the following
options and sample devices may be purchased for use with the ColorFlex EZ. HunterLab part
numbers are provided for convenience in ordering.
• Carrying case (D02-1010-619),
• Foot switch (D02-1010-327),
• External serial printer (L01-1010-678 for 110V, L01-1010-679 for 220V),
• Sample clamp/port-forward stand (D02-1010-459),
• Skein holder (02-7396-00),
• Port inserts (various part numbers),
• 1.25-inch glass port insert (02-6624-05),
• 1.25-inch UV port insert (D02-1010-618),
• Sample cup set for translucent liquids (CFLX-SC-ASSY for 45/0),
• Sample cup port plate for 45/0 (04-6622-00),
• 2.5-inch glass sample cup(04-7209-00),
• Sample cup opaque cover (04-4000-00),
• Ring and disk set (02-4579-00).

• External Printer

The external thermal printer (A13-1014-259) connects to the ColorFlex EZ's USB port
and prints measurement data or product setup parameters on request. The
communications cable supplied with the printer must be used to connect the printer
to the ColorFlex EZ. More information on the external printer is provided in its
separate Printer Manual.
The printer is automatically detected by the ColorFlex EZ once connected.
ColorFlex EZ User's Manual Version 2.2
Figure 79. Thermal Printer
59