Reading, Storing And Printing Data; Reading With Datalog; Reading With Averaging - HunterLab ColorFlex EZ User Manual

Reading with Datalog

The ColorFlex EZ can manually or automatically save measurements to the Datalog on a USB
flash drive in CSV (.csv) or ASCII (.dtg) format. The precision is 3 decimal places for colorimetric
data, 5 for chromaticity values and 4 for spectral data. Once saved to the USB, it can then be
read directly into Excel or EasyMatch QC for custom reporting.

Reading with Averaging

Complete the following steps to take and average multiple readings using the ColorFlex EZ:
Note: These instructions apply when Average in the product setup is set to a
Select READ from the ColorFlex EZ's main menu. Move the cursor highlight to its
1.
position using the UP and DOWN arrow buttons and then press the GO button.
The first Reading screen appears; select the setup to use. To read using the last
2.
product setup that was used, press NO (down arrow) and skip to Step 4. To select
the setup from a list of setups, press YES (up arrow). The Select setup screen
appears.
ColorFlex EZ User's Manual Version 2.2
CHAPTER SIX

Reading, Storing and Printing Data

value other than OFF.
Figure 60. Select Read
Figure 61. Choose to Select the Setup
41