Average; Date/Time - HunterLab ColorFlex EZ User Manual

Each press of the RIGHT arrow button changes the color difference index to the next one
available.
•

Average

To select this feature, choose the number of readings to average for each sample
before the AutoSearch comparison to available standards is made. This applies to all
setups selected for AutoSearch. Press the RIGHT arrow button to increase the
number of readings or the LEFT arrow button to decrease the number. Values
between 2 and 20 may be selected in increments of 1. To deselect the average
measurements used in AutoSearch, set this parameter to OFF.
Press BACK (the Go button) to return to the GLOBAL OPTIONS screen.
Date/Time
When DATE/TIME is highlighted and the RIGHT arrow button is pressed, a submenu appears.
Set the current date and time. Refer to the button pad map at the bottom of the screen for
selection options.
Press NEXT to move to another parameter to set. Year is set first, then month, then day,
followed by the hour and minutes. (Seconds are not set.) Press + to increase the value of the
current parameter or - to decrease it. Press SET to accept the entered date and time and leave
the Date/Time screen. Press BACK to discard the entered date and time and leave the
Date/Time screen.
ColorFlex EZ User's Manual Version 2.2
Figure 52. Average
Figure 53. Set Date/Time
35