Macro Button; Labscan Xe Accessories; Labscan Xe Options And Sample Devices - HunterLab LabScan XE Supplemental Manual

The lights shown here are (L-R): Power on, Small Area View In-Use, UV completely-excluded, and In-
Progress.

Macro Button

The macro button, also known as the Sensor button, activates a sample measurement.

LabScan XE Accessories

The following accessories are provided with the LabScan XE system and can be found in the standards
case:
•
Instrument Standard White tile with calibrated values
standardization.
•
Black glass
•
Diagnostic Check Green tile
•
White backup tile
instrument is not in use.
•
Tile data sheet
•
Fuses - Two fuses are provided as spares.
•
Communications
•
Power cord.
•
Standards care card
•
Certificate of traceability for the calibrated white

LabScan XE Options and Sample Devices

There are many options and devices available for positioning samples at the measurement ports of the
LabScan XE and for making the instrument easier to use. For the latest information, please refer to
https://support.hunterlab.com/hc/en-us/articles/218375923-Accessories-for-HunterLab-
Instruments.
6
LabScan XE Supplemental Manual for EasyMatch QC
- placed at the sample port during standardization.
- used to check instrument performance.
- used to back samples during measurement or cover the port when the
- Gives calibration information for the standard tiles.
cable.
- gives instructions on how to clean the standards.
- placed at the sample port during
tile.