Configuring Options And Setups; Product Setups - HunterLab ColorFlex EZ User Manual

ColorFlex EZ User's Manual Version 2.2
CHAPTER THREE

Configuring Options and Setups

Before using the ColorFlex EZ to make measurements, configure the instrument's various
options, such as the language, screen angle, and the date and time.
A product setup is a set of operating parameters that describe the operation of the ColorFlex EZ
for a specific product. Up to 250 setups may be stored in the instrument's memory.
The parameters that must be defined for each product include the color scale for display, target
color values for the product (if applicable), and the acceptable tolerances applied to the
standard values (if applicable). Each product setup is saved in the ColorFlex EZ memory with a
setup number and name.
The instrument options and product setups are retained in the ColorFlex EZ's memory even
when the instrument is turned off.
Maintenance may be performed on the product setups, such as resetting or printing them. This
chapter describes how to configure and maintain the instrument options and product setups.

Product Setups

Product Setup is selected from the main menu by moving the cursor highlight to the Product
Setup position using the up and down arrow buttons and then pressing the GO button.
Figure 16. Product Setup
The Product Setup screen appears. On this screen, choose to select the product setup from a
list (YES) or configure the last setup used (NO).
17