Reading, Storing And Printing Data; Reading With Datalog; Reading With Averaging - HunterLab ColorFlex EZ Tomato User Manual

Reading with Datalog

The ColorFlex EZ Tomato can manually or automatically save measurements to the Datalog on a
USB flash drive in CSV (.csv) or ASCII (.dtg) format. The precision is 3 decimal places for
colorimetric data, 5 for chromaticity values and 4 for spectral data. Once saved to the USB, it
can then be transferred to a computer and read directly into Excel or EZMQC for custom
reporting.

Reading with Averaging

Complete the following steps to take and average multiple readings using the ColorFlex EZ
Tomato:
Note: These instructions apply when Average in the product setup is set to a value
Select READ from the ColorFlex EZ Tomato's main menu. Move the cursor highlight
1.
to its position using the UP and DOWN ARROW buttons and then press the GO
button.
The first Reading screen appears; select the setup to use. To read using the last
2.
product setup that was used, press NO (down arrow) and skip to Step 4. To select
the setup from a list of setups, press Yes (up arrow). The Select setup screen
appears.
ColorFlex EZ Tomato User's Manual Version 2.0
CHAPTER FIVE

Reading, Storing and Printing Data

Figure 67. Select Read
Figure 68. Choose to Select the Setup
other than OFF.
39