Omron sysmac EtherCAT NJ101 Series Connection Manual page 27

9
The dialog box on the right
appears. Confirm that there is
no problem, and click Yes.
A message appears stating
"Synchronizing".
The dialog box on the right
appears. Confirm that there is
no problem, and click No.
*Do not return to RUN mode.
10
As shown in the figure on the
right, the font color used to
display the synchronized data
changes to white which is the
color used to specify
"Synchronized". Check that a
message appears stating "The
Synchronization process
successfully finished".
Confirm that there is no
problem, and click Close.
*When the project data created
in Sysmac Studio matches the
Controller data, a message
appears stating "The
Synchronization process
successfully finished".
*If the synchronization fails,
check the wiring and repeat
from step 1.
7．EtherCAT Connection Procedure
24