Table of Contents
Advertisement
5．Applicable Devices and Device Configuration
Precautions for Correct Use
Update Sysmac Studio to the version 1.43 or to a higher version. If you use a version higher
than the one specified, the procedures and related screenshots described in Section 7 and
the subsequent sections may not be applicable. In that case, use the equivalent procedures
described in this guide by referring to the Sysmac Studio Version 1 Operation Manual (Cat.
No. W504).
Additional Information
For information on the specifications of Ethernet cables and the network wiring, refer to
Section 4. EtherCAT Network Wiring of the NJ/NX-series CPU Unit Built-in EtherCAT® Port
User's Manual (Cat. No. W505).
Additional Information
For information on the power supply specifications of the Controller, refer to the NX-series
NX102 CPU Unit Hardware User's Manual (Cat. No. W593).
7
Advertisement
Table of Contents
