Table of Contents
Advertisement
4
The dialog box on the right
appears. Confirm that there is
no problem, and click Yes.
5
Check that the results "0 Errors"
and "0 Warnings" are displayed
on the Build Tab Page.
6
Select Online from the
Controller Menu.
When an online connection is
established, a yellow line
appears under the toolbar.
7
Select Synchronize from the
Controller Menu.
8
The Synchronization Dialog Box
appears.
Check that the data to be
transferred (e.g. NX102) is
selected.
Click Transfer To Controller.
*After you click on the button,
the Sysmac Studio data is
transferred to Controller, and
the data is synchronized.
7．EtherCAT Connection Procedure
23
Advertisement
Table of Contents
