Omron sysmac EtherCAT NJ101 Series Connection Manual page 21

Additional Information
For information on online connections, refer to Section 6. Online Connections to a Controller
of the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
6
Right-click Master on the
EtherCAT Tab Page displayed in
the Edit Pane, and select
Compare and Merge with
Actual Network Configuration
from the menu.
*If the EtherCAT Tab Page is not
displayed in the Edit Pane,
follow step 7 of 7.3.1. Starting
Sysmac Studio and Installing
the ESI File to display the tab
page.
A message appears stating "Get
information is being executed".
7
The Compare and Merge with
Actual Network Configuration
Dialog Box appears.
After the comparison with the
settings on Sysmac Studio,
E-CAT02 Rev:0x00000100 is
addressed as node 1 and is
added to the Actual network
configuration
Click Apply actual network
configuration.
8
A confirmation dialog box
appears. Check the message
and click Apply.
A result dialog box appears.
Check the message and click
Close.
7．EtherCAT Connection Procedure
18