Editing Or Deleting 编辑或删除 Afilterdcagroup一个滤波器Dca组 - PRESONUS StudioLive III Series Owner's Manual

4.3.2 Editing or Deleting a Filter DCA Group 编辑或删除滤波器DCA组
4.3.3 Managing DCA Group Masters 处理 DCA Group Masters
4.3.4 DCA Group Options 可选 DCA Group
S
1. To edit or delete a Filter DCA Group, first touch its name to select it.
2. Touch the Edit button to enter the Filter DCA Group Edit screen.
3. To add or remove a channel from the group, touch the name of the channel in
the provided list to select or deselect them.
4. To name or rename the group, touch the name field.
5. To delete this group, touch the Delete button.
When you're finished, touch Done to confirm your changes.
1 编辑或删除一个Filter DCA Group，首先触摸其名称来选择它。
2 触摸 " Edit " 按钮，进入 " Filter DCA Group Edit "界面。
3 要从组中添加或删除一个通道，在提供的列表中触摸通道的名称，来选择或取
消选择它们。
4 要命名或重命名该组，请使用 name field。
5 要删除该组，请触碰 Delete 按钮。
结束后，使用 "Done " 以确认你的更改。
You can bring the master faders for all existing Filter DCA Groups to the channel
strips by pressing the DCA Groups button in the Bank section.
按下Bank部分的DCA Groups按钮，使现有的所有 Filter DCA Groups 的主推子，
转入通道条上。
Pressing the Select button on a DCA Group master while the DCA Groups screen
is active will select it on the screen.
DCA Group 屏幕处于激活状态时，在 DCA Groups master主控上按下 "Select"
按钮。
Pressing and holding the Select button for a DCA Group master will allow you to add
or remove channels from the group by pressing the desired channel's Select button.
按住 DCA Group master 的 " Select "按钮，可以按所需通道的 " Select "按钮，从
该组中添加或删除通道。
Power User Tip: Pressing the Select button for a DCA Group Master will spill the group on
the faders. In this way, you can quickly make adjustments to a DCA mix.
Power User Tip: 按 "Select" 键，为 DCA Group Master 在推子上设定 spill 功能。通过
这种方式，可以迅速对 DCA 混音进行调整。
From the DCA Groups page, you have two options to customize the way these
groups function on your mixer:
在 DCA Groups 组页面，你有两个选项，可以自定义这些群组在你的调音
台上的运作方式：
Your StudioLive will automatically create a DCA group for channels that are tagged in
the same category (i.e., Drums, Horns, etc.), this button allows you to toggle that
option on or off.
你的 StudioLive 自动会为标记为同一类别的通道（如鼓、喇叭等）创建一个DCA
组，你可以切换这个按钮选择的开或关。
By default, the individual levels of every channel in a DCA group will adjust with the
group's master fader and maintain their relative mix. Enabling Traditional DCA mode
will adjust the output level of the group without changing the fader position of the
channels within that group.
27