PRESONUS StudioLive III Series Owner's Manual page 70

6 The Fat Channel
6.3 Input Mode
1
2 3
1. Processor On/Off. Enables/Disables the currently active processor.
启用/停用当前活动的处理器。
2. Input. For all StudioLive models, this opens the Channel Overview screen on the Touch
Display. For models equipped with a Dynamic Fat Channel, this button will spill the Input
layer controls onto the Fat Channel displays, encoders, and buttons. See Sections 6.3 and
6.8.1.
对于所有的StudioLive型号，这是打开Touch Display上的Channel Overview屏幕。对于
配备了Dynamic Fat Channel 型号，这个按钮将把Input layer控制spill到 Fat Channel
displays 显示屏、编码器和按钮上。 见第 6.3 和 6.8.1 节。
3. Gate. For all StudioLive models, this opens the Gate Overview screen on the Touch
Display. For models equipped with a Dynamic Fat Channel, this button will spill the Gate
controls onto the Fat Channel displays, encoders, and buttons. See Sections 6.4 and 6.8.3.
对于所有的StudioLive型号，这是打开触摸显示屏上的Gate Overview屏幕。对于配备
了Dynamic Fat Channel的型号，这个按钮，将把Gate controls 的Spill到Fat Channel的
显示屏、编码器和按钮上。 见第 6.4 和 6.8.3 节。
4. Comp. For all StudioLive models, this opens the Compressor Overview screen on the
Touch Display. For models equipped with a Dynamic Fat Channel, this button will spill the
Compressor controls onto the Fat Channel displays, encoders, and buttons. See Sections
6.5 and 6.8.
对于所有的StudioLive型号，这将打开触摸显示屏上的Compressor Overview屏幕。对于
配备了动态肥大通道的型号，这个按钮将把压缩机控制溢出到肥大通道的显示屏、
编码器和按钮上。见第6.5和6.8.4节。
5. EQ. For all StudioLive models, this opens the EQ Overview screen on the Touch Display.
For models equipped with a Dynamic Fat Channel, this button will spill the EQ controls
onto the Fat Channel displays, encoders, and buttons. See Sections 6.6 and 6.8.5.
对于所有的StudioLive型号，这是打开Touch Display屏上的EQ Overview。对于配备
了Dynamic Fat Channel型号，这个按钮将把EQ控制Spill到 Fat Channel 的显示屏、编
码器和按钮上。See Sections 6.6 and 6.8.5.
6. Aux Sends. For all StudioLive models, this opens the Aux Sends Overview
screen on the Touch Display. For models equipped with a Dynamic Fat Channel, this
button will spill the Aux Send levels, mutes, and pan controls for the currently selected
channel onto the Fat Channel displays, encoders, and buttons. See Sections 6.7 and 6.8.6.
对于所有的StudioLive型号，这是打开触摸显示屏上的Aux Sends Overview 显示。对
于配备了Dynamic Fat Channel的型号，这个按钮将把当前所选的通道的Aux Send
levels、静音和pan控制Spill到Fat Channel显示屏、编码器和按钮上。 见第 6.7 和 6.8.6
节 。
7. User. Model-dependent: 取决于模型：
- StudioLive 32SX and 32SC. Opens User Profile screen on Touch Display.
在 Touch Display 上打开 User Profile 屏幕。
- All Other Models. Spills user-customizable parameters on Fat Channel
displays, encoders, and buttons. See Section 6.9.
在Fat Channel显示器、编码器和按钮上，spill用户自定义参数。 见第 6.9 节 。
8. Fat Channel A/B. Switches between two different Fat Channel Settings.
See Section 6.1.1.
在两个不同的Fat Channel Settings设置之间进行切换。 见第 6.1.1 节。
9. Prev/Next Page. Navigates to additional parameters (if available). Note: These controls
are not available on the StudioLive 32SX and 32SC.
访问到其他参数（如果有的话）。注意：这些控制在 StudioLive 32SX 和 32SC 上不
可用。
9
4 5 6
StudioLive™SeriesIII
Owner's Manual
8
7
48