PRESONUS StudioLive III Series Owner's Manual page 188

Selecting the Analog Sends menu will allow you to patch any mix to any FlexMix
output. Select the output to which you'd like to route your mix first. Then select the
mix from the Available Source list to the right.
选择 "Analog Sends"菜单，你就可以将任何混音跳接到任意的FlexMix输出。首
先选择你想路由混合的输出。然后从右边的Available Source list列表中选择混
音。
Press the reset button to repatch the default routing.
按reset按钮，重新配接默认路由。
You can route any of the following mixes to physical mix outputs on your StudioLive
mixer:
你可以将以下任何一种混音，路由到StudioLive调音台的混音输出中。
• FlexMixes
• FX Send Mixes (pre-effects processor)
• Subgroups A-D (32-channel models only)
• Main L/R Mix
• Main Mono/Center bus (StudioLive 64S only)
• Solo L/R Bus
Press Reset Sends while Analog Sends is active to revert to the default settings.
激活Reset Sends 时，按Reset Sends可以恢复到默认设置。
116