PRESONUS StudioLive III Series Owner's Manual page 37

4. Select the channel of your choice on the Touch Display to assign it to the
channel strip of your choice.
在Touch Display屏上,选择你所选择的通道，将其分配到你所选择的
通道条上。
5. Repeat steps 2-4 as necessary to populate the User layer with your most
needed channels.
根据需要重复步骤 2-4，用你最需要的通道填充 User layer 用户层。
6. Press Done when finished.
完成后，按 "Done"。
To Edit the User layer, press and hold the Select button for the channel for which
you'd like to change the assignment. This will open the User Layer Assignment
screen. From here you can unassign the channel completely or change the channel
assigned to it.
要 Edit 编辑用户层，按住Select按键，选择你想分配的通道。这将打开 "User
Layer Assignment "屏幕。这里，你可以完全取消通道的分配，或者改变分配
给它的通道。
Power User Tip: Every channel, mix master, and DCA group master is available to assign
to the User Layer. Use the encoder below the Touch Display to navigate through all the
available options.
Power User Tip: 每个通道、混音主控和 DCA 组主控，都可以分配给 User Layer 。
Touch Display 下方的编码器，使用它来浏览所有可用的选项。
24