PRESONUS StudioLive III Series Owner's Manual page 229

Digital mix console / recorder with motorizedfaders
Hide thumbs Also See for StudioLive III Series:
Table of Contents

Advertisement

14
Technical Information
14.3
Block Diagrams
Block Diagrams 块状图
14.3
14.4
Trouble shooting Information 排除故障信息
The block diagrams for our StudioLive Series III mixers are too large to be included in
this manual. Please visit our website for the latest Series III block diagrams in Adobe
PDF format.
我们的StudioLive III系列调音台的方框图太大,无法包含在本手册中。请访问
我们的网站获取最新的Adobe PDF格式的III系列方框图。
Please check the PreSonus Web site (www.presonus.com) regularly for software
information and updates, firmware updates, and support documentation, including
frequently asked questions.
请定期查看PreSonus网站(www.presonus.com),了解软件信息和更新、固件
升级以及支持文件,包括常见问题。
Online technical support is available to registered users through your My PreSonus
account. Visit
my.presonus.com
注册用户可通过 "My PreSonus "账户,获得在线技术支持。注册请访问
my.presonus.com 。
Fader Movements Have No Effect on Audio. Press the Main Mix button in the
Mix Select section, then try moving channel faders up and down, to see if their
movement affects the overall output volume, as shown by the main output meter. If
not, make sure that your channels are assigned to the Main bus.
按Mix Select section部分的Main Mix按钮,试着上下移动通道推子,看看它们
的移动,是否会影响整体的输出音量,如主输出表所示。如果没有,请确保你
的通道被分配到Main bus上。
No Internal Effects in the Main Bus. Press the Aux button in the Metering section
and verify the output levels of the internal FX buses. If the level is too low, use the
effect return channel to increase the master level for the effects mix. Press the Select
button for each FX bus and make sure it is assigned to the main output in the Assign
section of the Fat Channel.
按下Metering section部分的Aux按钮,确认内部FX总线的输出电平。如果电平
太低,使用effect return通道来增加主电平的效果混响。 按每个FX总线的Select
按钮,确保它被分配到Fat Channel的Assign部分的主输出。
No Output on the Solo Bus While Monitoring. Verify that both the Solo volume
and the headphone, or monitor, volume is at a reasonable level for comfortable
listening. Make sure that you only have Solo selected in the Monitor section of your
StudioLive.
确认Solo的音量和耳机或监听的音量都在合理的水平上,以便舒适地聆听。
确保你在StudioLive的监听部分,仅选择了独奏。
to register.
StudioLive™ Series III
Owner's Manual
150

Advertisement

Table of Contents
loading

Table of Contents