Danfoss VLT AutomationDrive FC 300 Design Manual page 79

FC 300 Design Guide
60 PWM - Pulse Width Modulation, 525
- 690 V (except P315)
Illustration 4.17: Derating of I
for enclosure D at 690 V, using 60 PWM in High
MAX
torque mode (160% over torque). Note:
for P315.
Illustration 4.19: Derating of I
for enclosure D at 690 V, using 60 PWM in
MAX
Normal torque mode (110% over torque). Note:
not
valid for P315.
60 PWM - Pulse Width Modulation, 525
- 690 V, P315
Illustration 4.21: Derating of I
for enclosure D at 690 V, using 60 PWM in High
MAX
torque mode (160% over torque). Note: P315
ly
.
for different T
out AMB,
not valid
for different T
out AMB,
for different T
out AMB,
on-
MG.33.B9.02 - VLT ® is a registered Danfoss trademark
SFAVM - Stator Frequency Asyncron
Vector Modulation, 525 - 690 V (except
P315)
Illustration 4.18: Derating of I
out
for enclosure D at 690 V, using SFAVM in High
MAX
torque mode (160% over torque). Note:
for P315.
Illustration 4.20: Derating of I
out
for enclosure D at 690 V, using SFAVM in Nor-
MAX
mal torque mode (110% over torque). Note:
valid for P315.
SFAVM - Stator Frequency Asyncron
Vector Modulation, 525 - 690 V, P315
Illustration 4.22: Derating of I
out
for enclosure D at 690 V, using SFAVM in High
MAX
torque mode (160% over torque). Note: P315
ly
.
4. FC 300 Selection
for different T
AMB,
not
valid
for different T
AMB,
not
for different T
AMB,
on-
79
4