Danfoss VLT AutomationDrive FC 300 Design Manual page 132

7. Application Examples
Set Action 3 in par. 13-52 [3] to
Set Action 4 in par. 13-52 [4] to
7
Set the Smart Logic Control in par. 13-00 to ON.
Start / stop command is applied on terminal 18. If stop signal is applied the frequency converter
will ramp down and go into free mode.
132
Select preset 1
[11]
No Action
[1]
MG.33.B9.02 - VLT ® is a registered Danfoss trademark
FC 300 Design Guide